ccHost is Creative Commons' open source (GPL licensed) project that powers ccMixter and is the winner of the Linux Journal LinuxWorldExpo Product Excellence Award for Best Open Source Solution. Read more about ccHost here.

Download

Sign up for our RSS release feed to make sure you don't miss important bug fixes and feature updates.

Current Stable Release

Latest stable build of ccHost 4.0.1 is available in several common archiving formats (.zip, .tar.gz, .tar.bz2, etc.)

ccHost 4.0.1 download page

To install: Unpack the contents of the archive on your local machine and see ccadmin/INSTALL.

For those who installed 3.0: Please upgrade to 4.0 because there is a data loss bug in 3.0 Specifically: saving any user's profile will revert all menus and submit form customizations to factory defaults. Sorry for any trouble this has caused.

Experimental Thrice-Daily Builds

Currently, ccHost packages are being made three-times a day and are available here:

ccHost 3x daily builds

Our experience has been very good however these are minimally tested builds so download, install and use these packages at your own risk.

Only 30 days worth of builds are saved currently.

Install

As stated above, all the information you need for installation is in the distribution package you downloaded. Treat these notes as addendums, hints and other possibly useful information.

Simple

The easiest way to get going is to start with a web hosting server. Common web hosting services like Dreamhost and WebsiteSource provide an administration interface for setting up a mysql database. Hosting services also provide some FTP or SFTP mechanism to upload the ccHost installation files as well. 99% of all services provide support for PHP as well. If you have questions about support in this area, check the server requirements below and with your hosting service.

1. Unzip the ccHost ZIP archive on your local system and copy the files to your server retaining the the directory structure.
2. Browse to http://where_you_installed/ccadmin and follow all the instructions from then on.

Advanced

If you have basic knowledge of using FTP and you are comfortable at a terminal command line you can use these steps to before, during and after installation. Many of these can be filed under "you'll be glad you did" by the time you get to the browser-based installation steps later on.

Enabling 'Pretty URLs'

As of ccHost 4.0: if you are installing ccHost into a clean directory on your web server without any previous ReWrite rules in your .htaccess file, then the installer will attempt to do what follows below automatically.

All ccHost commands and URLs based on query strings:

http://your_install_root/index.php?ccm=/media/people/victor

That same URL can be made 'pretty' on Apache installations so that it looks more like:

http://your_install_root/media/people/victor

Here is the block of code in your .htaccess file setting the rewrite rules to get pretty urls:

RewriteEngine On
RewriteBase /
RewriteCond %{REQUEST_FILENAME} !-d
RewriteCond %{REQUEST_FILENAME} !-f
RewriteRule ^(.*)$ /index.php?ccm=/$1 [L,QSA]

If you installed to a directory below the site's root make sure to specify that in the RewriteBase directive.

For perfomance reasons (and if you are given access) you should put those directives into an Apache virtual host block in the .conf file for your server:

<VirtualHost *:80>
ServerName ccmixter.localhost
ServerPath /ccmixter
#DocumentRoot /var/www/localhost/htdocs/cchost 
DocumentRoot /home/rejon/Documents/freelance/creativecommons/src/ccmixter

<Directory "/home/rejon/Documents/freelance/creativecommons/src/ccmixter">
RewriteEngine On
RewriteBase /
RewriteCond %{REQUEST_FILENAME} !-d
RewriteCond %{REQUEST_FILENAME} !-f
RewriteRule ^(.*)$ /index.php?ccm=/$1 [L,QSA]
</Directory>
</VirtualHost>

getID3

ccHost depends on the getID3 library for verifying uploads. Install getID3 (at least 1.7.3) here: http://www.getid3.org/#download before you install ccHost. (It's a simple download-unpack operation.)

For example (on Linux):

tar xzf getid3.tar.gz
cp -a getid3/getid3 /var/www/localhost/htdocs/getid3/

The ccHost installer will 'find' your getID3 installation if it's roughly in the same area of the server, however it is not required that your getID3 be visible on the web and in fact, it's probably more secure if it isn't.

ccHost Terminal Installtion

• Unzip the ccHost ZIP or tar. bz2 archive on your local system and copy the files (retaining the directory structure) to your web-server directory.
• On Linux change the group and permissions of the files so they may be written by the web server (e.g., in the following lines, the web-server account is "apache").

For example:

cp -a cchost-1.0.3 /var/www/localhost/htdocs/cchost
chgrp -R apache /var/www/localhost/htdocs/cchost
chmod g+w /var/www/localhost/htdocs/cchost/

• Create a new database for ccHost (e.g., named "cchost") and create an administrative user to access it (e.g., "cchostadmin"). For example:

mysql -p -u root
mysql> CREATE DATABASE cchost;
mysql> GRANT SELECT,INSERT,UPDATE,DELETE,CREATE,ALTER ON cchost.* TO 'cchostadmin'@'localhost' IDENTIFIED BY 'YOUR_PASSWORD_HERE';

Make sure to change 'YOUR_PASSWORD_HERE' (and maybe 'cchostadmin') to something unique to your site. (Many systems provide phpMyAdmin to take care of these tasks.

• Create directory /var/log/cchost or other location to store log files. Must be writable by the web-server account (e.g., "apache"). For example:

mkdir /var/log/cchost
chown apache:apache /var/log/cchost

Finish with Install

Browse to http://where_you_installed_cchost/ccadmin

Everything else you need to know will be on the screen from that point on, including suggested php.ini and .htaccess settings, access permissions requirements, etc.

More .htaccess file settings

Put the following into a file named '.htaccess' in your root directory of a ccHost setup if you can't set your php.ini settings for your hosting setup. These settings should work, but should be tested first. They correct many memory problems people have with ccHost.

# php configs http://www.php.net/manual/en/ini.core.php#ini.memory-limit
# http://www.php.net/manual/en/ini.php#ini.list

php_value max_input_time 200
php_value max_execution_time 200
php_value memory_limit 20M
php_value upload_max_filesize 20M
# next line fixes noncompliant & used in php
php_value arg_separator.output &
php_flag session.use_trans_sid off
# turns off annoying autoquotes
php_flag magic_quotes_gpc off

Options +MultiViews

# Stop morons that are hammer your site
# Open Clip Art Library had someone DDoS'ing our site
<Limit GET>
 order deny,allow
 deny from 59.116.0.0/16
</Limit>

Upgrading

Always make a backup of your mySQL ccHost database and the files you change (probably all of the ccfiles directory) before you start the upgrade process. Things go wrong. You have been warned.

Upgrading to 4.0 from 3.1

Please see the document in SVN or in the 4.0 release package that, when you uncompress the archive you downloaded, resides in CCHOST_ROOT/ccadmin/INSTALL.txt

Upgrading to 4.0 from Releases Previous to 3.1

ccHost 3.1 represents a significant change in how we handle your customized files and paths. The main purpose of this update is to ensure that updating in the future will be as painless as possible. In other words, we have learned our lessons and the hoop-jumping days of moving your custom files around before an update will no longer be necessary... after this update.

During this update you'll create a directory structure that will house all your custom and temporary files and then never have to worry about it.

NOTE: As always, the first thing you should is make a backup of your MySQL database as well as your ccHost directory tree. See our administor's guide on backing up if you need specific help on how to do this:

http://mirrors.creativecommons.org/cchost/docs/cchost/tutorial_admin.backup.pkg.html

NOTE TO SVN and 3x DAILY BUILD USERS: If you are up to date with the current SVN code base and you have already used Global Settings/Paths to customize your install then you can just log in as administrator and skip down to Step 8 below.

Here are the steps for this update:

1. Make sure you logged in admin on your ccHost installation with the 'remember me' option CHECKED ON.

2. If you have a file called ccextras/cc-language.php delete that file now

3. Create a directory under your ccHost web root that looks like the figure below. Make sure these directories are writable to PHP scripts. To ease the update you should make all these globally accessable (0777) for now. After the update you can rename and move these files around but the updater will look for this specific structure just to make the transition easier.

    - local_files
      |
      |- lib
      |
      |- skins
      |
      |- temp
      |
      |- viewfile

4. MOVE all custom modules (.php, .inc, etc) you installed into ccextras to local_files/lib (make sure to update any include() statements you might have to reflect the move)

5. COPY custom skins you installed in cctemplates to local_files/skins. Make sure to update any references to cctemplates, including implicit ones, (e.g. @import('skin-simple.css') becomes @import('../../cctemplates/skin-simple.css')) to reflect the move.

6. If you edited cctemplates/custom.xml COPY it to cctemplates/sidebar.xml

7. MOVE all custom files you installed or edited (e.g. home.xml) in ccfiles to local_files/viewfile. Make sure to update any references (e.g. <IMG src="" ) to reflect the move.

8. Unzip the ccHost 3.1 package on your local machine

9. Copy everything EXCEPT the ccadmin directory over your server's ccHost directory.

10. Browse to http://your_installation_root/?update=1

11. If you are using your own skin go to 'Manage Site/Settings' to tell ccHost to use the version in local_files/skins.After successfully reseting your skin settings you should remove the skin from cctemplates and never touch that directory again.

NOTE: Your skin may be 'trashed' during this process and your pages appear totally without styling. The site should continue to function however, you'll just be scrolling a lot more until you can reset the skin settings.

Again, this really is the very last time this will happen. The new system of using admin configured paths for looking for files means that you can scribble all you want in your directories, never touch the cc* directories again and always have a simple install from now on.

Troubleshooting

Known Issues

Bug Found in 3.0 If you installed 3.0 then you must download a newer release immediately. Please see the Download section for details.

File Access

By far the most common issue with new installs on Unix based systems involves file access permissions. The recommended way of dealing with this is to set the entire ccHost directory structure as all-access (0777) just while you get things going. If everything else is working then you should follow the ccHost file access guildlines.

Alternative: *nix-based systems

From commandline and after having changed directory to your local cchost path, run bin/cc-host-fix-permissions.sh.

"There is an error rendering this page"

The most common reason you get this error message on new installations is because your 'Cache Directory' (e.g. local_files/temp) is not writable by ccHost. You should make sure this is not the case by setting that directory's permission to 0777 and trying again.

The second most common reason are template errors during development of skins and other user interface testing. If you haven't already turn on debug messages login as admin and try to render the page again.

NOTE: Also, delete all files inside the cache directory if the problem persists. ccHost will regenerate these files.

"Down for upgrade, check back soon"

This is actually an indication that something is wrong in the code (i.e. a bug) or your installation. Turn on debug messages and try to access your site. The very least that will do is give ccHost developers the exact location of the problem. After you turn on debugging, look at your cc-errors.txt file and send that along to the developers so they can narrow down the issue for you.

Outputting Debug Messages

In order to help ccHost developers troubleshoot your site you should enable debugging messages in your system. The easiest way to do this is to create a file called _DEBUG_.php with the following contents:

<?
  CCDebug::Enable(true);
?>

and put that file into a directory in your 'Plugins Path' (e.g. local_files/lib)

Now repeat the steps that led you to the problem and hopefully you will get more detailed information about the error.

Make sure to remove this file in your production installation. Hint: Changing the extension to anything other than .php is the same as removing it

Administration

So you've got your ccHost up and running. now what?

Check out the new official ccHost Administrator's Guide.

This document is based on information gathered from admins who have installed ccHost.

It is brand new, not reviewed and (as of this writing) has tons of spelling and grammatical errors. However, there is a lot of hopefully useful information. Please give the team feedback and by all means become a contributing editor.

Development

Source Code & Documentation

• Browsable Source Code (Anonymous)

• How to Check Out Code -- Specifically for ccHost:
  • Log in as administrator on your ccHost installation
  • Then do your svn update
  • Browse to http://your_installation?update=1

• Online Code Documentation including developer's guide.

Creating Skins

For administrators looking to customize the look of their sites you should read the Admin's Skin Tutorial which also includes a Skin Maker download tool.

For slightly more advanced usage see How to create a skin for ccHost

People

• Victor Stone
• Jon Phillips

Communication

• Chat: #cc on irc.freenode.net
• Wiki: This page (http://wiki.creativecommons.org/wiki/CcHost)
• Mailing List: https://lists.sourceforge.net/mailman/listinfo/cctools-cchost
  • Archive

Submitting Code

Before going too far down this road you definitely want to hop on the dev mailing list. If you are shy ask to speak with Victor or Jon in private.

Submit Patches

Bugs and Feature Requests

Make sure to use the 'ccHost' category when filing bugs. Also, please use a real email so that we can followup on any bugs posted. Be descriptive when posting and commenting on bugs (every bit counts).

• Report Bugs
• Request Features

Roadmap

Contribute to the plan and help chart the course for the project.

Zeitgeist

Goal

The goal of this project is to spread media content that is licensed under Creative Commons throughout the web in much the same way that weblogs spread CC licensed text.

Short Description

"Web-based System Supporting Remixing and Collaboration on Media"

Slightly Longer Description

ccHost is an open source (GPL licensed) project that provides web-based infrastructure to support collaboration, sharing, and storage of multi-media using the Creative Commons licenses and metadata. It is the codebase used by ccMixter and other sites.

Besides its focus on sharing content, ccHost differentiates itself from other multi-media hosting programs by emphasizing the reuse (a.k.a. remixing) of content between artists, not only between artists on any given installation of ccHost, but between all installations across the web and any web site that implements the Creative Commons Sample Pool API, including non-ccHost sites such as the freesound project.

Press

Release Notes

Press Releases

Sound Bites

• "ccHost enables you to 'run your own flickr or youtube while having an infrastructure for legally sharing audio, video, text, and other media." Jon Phillips 22:50, 25 August 2006 (UTC)

Please add your own sound bite...

Screenshots

• The text for the front page can be changed by editing ccfiles/home.xml. The other menu functions and so on are generally modified using the admin functions of the site.

Usage Examples

• ccMixter - Primary usage of ccHost is the Creative Commons remix site, ccMixter.
• Open Clip Art Library ccHost in testing
• Open Font Library
• Freemusic Project
• Open Source Cinema
• Matrix Rayne Online
• remix.linux
• ccmixter South Africa
• fourstones.net Victor's personal website
• TeacherHost - for Instructors to share instructional materials.
• Adrenalinic Sound
• ccMixter from CC Taiwan
• Overmixter - Brazil
• Iamacc.org Iamacc.org is a site I have dedicated to the Creative Commons. It is free and open to anyone who shares their creativity to the world.

---

Appendix A: Compatibility

Browsers

Tested on: Firefox 1.0+ Mac/PC/Linux, IE 6+ PC, Safari Mac

Cookies must be enabled.

Most skins (the ones people will want to use) require Javascript enabled.

Servers

Primary development is done on Windows XP and up-to-date Linux development systems using Apache, mySQL, and PHP.

Linux

ccHost on Apache (2.0.49 up to at least apache-2.0.55-r1) on Linux,

One should be able to easily install mySQL, PHP, and Apache (if they are not already available) through their distributions packaging system.

Windows IIS Server

Windows users with their installation disks may install optionally the Windows IIS Web Server. This option has been tested. However, there might still be issues with it, and if so, please file a bug.

Even if you using Apache on Windows you may need to have IIS installed if you plan to use mail contact functions.

Windows Apache

There are many good tutorials for setting up a Windows/Apache/MySQL/PHP site (Google search) and all three subsystems now come with Windows installers making the job of installing relatively straightforward.

XAMPP

Windows installations without Apache, mySQL and PHP already installed should consider using XAMPP for Windows, which provides an easy install of Apache web server, MySQL database server, and PHP and perl programming languages. This is an easy way to get up and running, with the underlying technology necessary to use ccHost.

Follow the instructions for installation of XAMPP to know where to put the uncompressed ccHost package to properly work with your local setup.

Mac OS X

NOTE: This setup is similar to Linux.

Verified:

• OS X 10.4.6
• default OS X MySQL build, 4.0.26
• GetID3 1.7.7
• default Apache/PHP

Appendix B: Redistribution

HOWTO Tag a Release

Really, each major release needs to be tagged, but this 2.0.1 is the first SVN release, and we did it post CVS -> SVN migration. In the future, this is the proper way to tag and branch.

svn copy https://cctools.svn.sourceforge.net/svnroot/cctools/cchost/trunk \
https://cctools.svn.sourceforge.net/svnroot/cctools/cchost/tags/2_0_1 \
-m "Tagging 2.0.1 bugfix release"

Here is more about SVN merging/branching.

Packaging

Sign Package

You should do this for all packages (RPM, tar.gz, zip, tar.bz2, etc)

gpg --detach-sign --armor cchost-VERSION.tar.gz

Verify Package

gpg --verify cchost-VERSION.tar.gz.asc